Psion OMNII Bedienungsanleitung PDF herunterladen (Seite 46)

Chapter 2: Basic Operation

Checking the Scanner

30 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual

• A dialog box is displayed letting you know that you will lose all unsaved data. Tap

on OK.

Once the reset is complete, if you checked the box next to Use Windows to configure my

wireless settings, the Wireless Zero Config screen is displayed on the hand-held. Refer to

Appendix B: “Wireless Zero Config” for details.

2.9 Checking the Scanner

If your Omnii is equipped with an internal scanner, you can test it to ensure that it is operat-

ing properly. Point the scanner window at a bar code that your scanner was designed to

decode —for example, a 1D UPC bar code or 2D bar code. Press the SCAN key or pistol

trigger, and check for a valid decode on the hand-held’s screen.

Performance is improved if you disable all unneeded bar codes in the Bar Codes screen.

Review “Teklogix Scanners” on page 149 and Appendix C: “Bar Code Settings” for details

about bar codes.

2.10 Data Transfer between Omnii and a PC

Data transfer options vary slightly depending on the type of operating system installed in

your PC.

For Windows XP SP2 operating systems or earlier, Microsoft

ActiveSync

connectivity

software can be used to connect your Omnii to PCs.

If the Windows Vista

or Windows 7 operating system is installed in your PC, ActiveSync

is not required to transfer data between your Omnii and your PC.

By using a Snap Module or Desktop Docking Station with your Omnii, you can connect to a

PC with a cable and:

• View Omnii files from Windows Explorer.

• Drag and drop files between Omnii and the PC in the same way that you would between

PC drives.

• Back up Omnii files to the PC, restore them from the PC to the hand-held again, etc.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 357 358

Keine Kommentare

Psion OMNII Bedienungsanleitung Seite 46