Psion OMNII Bedienungsanleitung PDF herunterladen (Seite 260)

C-20 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual

Appendix C: Bar Code Settings

Decoded (Internal) Scanners

MSI Plessey

that falls within a specified range (e.g. between 10 and 15 characters). The minimum and

maximum values for the range are 5 and 55, respectively.

CLSI Editing

When enabled, this parameter strips the start and stop characters and inserts a space after the

first, fifth, and tenth characters of a 14-character Codabar symbol.

NOTIS Editing

When enabled, this parameter strips the start and stop characters from decoded

Codabar symbol.

Length Restriction

Refer to “Length Restriction” on page C-14 for details.

Add/Remove Data

Refer to “Add/Remove Data” on page C-14 for details.

C.2.14 MSI Plessey

Enabled

Set this parameter to on to enable “MSI Plessey”.

Set Length L1 and Set Length L2

Lengths for “MSI Plessey” can be set for Any length, Length within a range, One discrete

length or Two discrete lengths. The length of a code refers to the number of characters (i.e.,

human readable characters), including check digit(s).

Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where

you can define the code length that will be recognized by your scanner.

Choosing One discrete length allows you to decode only those bar codes of a specified

length. Choosing Two discrete lengths allows you to specify two lengths of bar codes that

may be decoded. Length within a range allows you to decode any bar code with a length

that falls within a specified range (e.g. between 10 and 15 characters). The minimum and

maximum values for the range are 6 and 55, respectively.

Note: Symbol length does not include start and stop characters.

1 2 ... 255 256 257 258 259 260 261 262 263 264 265 ... 357 358

Keine Kommentare

Psion OMNII Bedienungsanleitung Seite 260