Psion OMNII Bedienungsanleitung Seite 194

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 358
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 193
Chapter 6: Peripheral Devices & Accessories
Snap Modules
178 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual
Model No. ST4005 (USB DE9M variant): through a powered DE9M serial connector it
powers and charges the hand-held, and provides communications to tethered devices.
The DE9M connector is capable of speeds up to 115,200 kbp.
Figure 6.5 Snap Module Models and Installation
To attach the adaptor to Omnii:
Make sure that the adaptor connector and Omnii docking connector are free of dust or
any other debris before connecting them.
A slot in the side rail on each side of the hand-held accommodates the locking clips of
the adaptor. To attach the adaptor, align it with the base of the hand-held and gently slide
up until the locking clips snap into place (Refer to Figure 6.5).
To remove the adaptor, press down on the base of the clip arms to release them from the
Omnii side rails and slide the adaptor off.
ST3101 (Charger)
ST4001 (USB Host/Client)
ST4005 (USB DE9M)
DC IN Port
Locking Clip
Side Rail
Hand Strap Slot
Note: If you are using a hand or shoulder strap, there is no need to remove it before
installing the Snap Module, since the Omnii hand strap slot will still be accessible.
Seitenansicht 193
1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 357 358

Kommentare zu diesen Handbüchern

Keine Kommentare