Psion OMNII Bedienungsanleitung PDF herunterladen (Seite 164)

Chapter 5: Configuration

Tek l o g ix Im a g e r s

148 Psion Teklogix Omnii XT10 Hand-Held Computer User Manual

• Whether to perform a quick format. Quick formatting removes all reference to data in

the partition without erasing the actual partition. The partition will be treated as

empty, and new data will overwrite it.

6. Tap Start. The partition is formatted.

To mount a partition:

1. Choose the desired partition.

2. Tap the Properties button. The Partition Properties dialog appears.

3. Tap the Mount button. The partition is mounted. The asterisk appears next to its

name in the partitions list.

The Partition Properties dialog has buttons for additional functions. Partitions can be defrag-

mented, and their file structure can be scanned.

5.11 Teklogix Imagers

The Teklogix Imagers applet is used to create, modify, delete, and activate imager settings.

The principle uses of the applet are to decode bar codes and to capture images. A Demon-

stration Application is provided to demonstrate how the imager works. Refer to “Demo” on

page 65 for details.

Refer to Appendix D: “Teklogix Imagers Applet” for configuration details.

To launch this applet:

•In the Control Panel, choose the Teklogix Imagers icon.

Note: This icon is only displayed when the appropriate imager is installed in your Omnii.

If there is an imager installed but this icon is not present, additional software (ICS)

may need to be installed.

To enable a newly-installed imager, Press and hold down the [FN] key and the

[ENTER/Power] key simultaneously for a minimum of three seconds.

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 357 358

Keine Kommentare

Psion OMNII Bedienungsanleitung Seite 164