Psion OMNII Bedienungsanleitung PDF herunterladen (Seite 199)

Chapter 6: Peripheral Devices & Accessories

Indicators

Psion Teklogix Omnii XT10 Hand-Held Computer User Manual 183

6.7.2 Indicators

The front-mounted LED on the desktop docking station indicates the spare battery charge

status. The LED on Omnii is active even when the hand-held is inserted in a docking station

(and in suspend mode) so that the charge status of the battery can be detected easily.

Table 6.6 Docking Station Battery Charge LED Behaviour

6.7.3 Operation

6.7.3.1 Charging the Omnii Battery

The desktop docking station supplies DC power to enable the Omnii internal fast charger.

When installed in the dock, the Omnii battery charge LED will illuminate to indicate the

unit has external power and can charge the internal battery. Omnii charge indication follows

the same convention as the charger's spare battery indicator (Figure 6.8).

6.7.3.2 Charging the Spare Battery

• Install the battery in the battery charge well (rear slot of the desktop docking station).

Place the battery contacts down to mate with the connector, and pivot the battery into

place in the battery charge well.

• The desktop docking station spare battery LED lights up immediately. During charge

the LED will be flashing green.

Charge LED Behaviour Function

OFF No battery detected.

Solid Green Battery charging complete.

Flashing Green Charge in progress.

Flashing Yellow Battery is not charging due to out-of-temperature conditions.

Solid Red Unable to read battery or non Psion Teklogix battery.

Note: Battery charging continues whether Omnii is switched on or off.

Important: Do not store spare batteries in a charger for more than 72 hours. Doing so

may damage the battery or reduce its charge capacity.

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 357 358

Keine Kommentare

Psion OMNII Bedienungsanleitung Seite 199