
Appendix C: Imagers Applet
Configuring the Bar Code Decoding Camera Presets
Psion EP10 Hand-Held Computer User Manual
C-8
C.4 Configuring the Bar Code Decoding Camera Presets
To configure the bar code decoding camera presets:
•Tap on Start>Settings>System.
•Tap on the Barcoding tab.
Figure C.3 Bar Code Presets
This window lists all the presets, both predefined and the custom. Presets are identified as follows:
• Predefined presets are marked as read-only. For a description, review “Predefined Presets” on
page C-3.
• Custom presets are marked as read and write.
• One preset – either predefined or custom – is marked as active.
The top part of the window displays the bar code decoding camera presets.
C.4.1 Selecting a Camera
One camera must be selected for configuration. To select a camera:
•Tap on the Camera Presets drop-down menu to view the camera options.
•Choose a camera – either Imager, the imager located at the top of the unit, or Color Camera, the
camera located at back of the EP10.
C.4.2 Setting the Active Preset
An active preset has an A to the right; in Figure C.3 on page page C-8, the active preset is Defaults. To set an
active preset:
• Highlight the preset, and tap on the Activate button.
C.4.3 Viewing a Preset
To view the parameter settings in a preset:
• Highlight a preset, and tap on the View button.
The associated preset window is displayed.
Note: The top portion of the window displays the bar code decoding camera presets.
Important: Currently, only the ‘Imager’ can be used to read bar codes. The ‘Colour
Camera’ is limited to taking photos.
Kommentare zu diesen Handbüchern